Published at Saturday, August 04th, 2018 - 00:56:43 AM. . By Nannie Tran.
Mixing the Cerlon with the paddle causes heat to start to build up in the mixture. Heat causes the Cerlon to set. Using a heat gun you need to get the temperature up to about 80 to 90 degrees before you pour it into the area that needs to be repaired. Once it reaches 100 degrees you have only about 10 minutes to finish the patch with a trowel.
You can mix a batch of Cerlon at a time then trowel it because Cerlon will adhere to itself even if it is set without causing a cold joint. Cerlon sets in 10 minutes. Cerlon when setting the temperature reaches in excess of 140 degrees. In my opinion Cerlon to patch concrete is best product to use to eliminate salt from damaging the Concrete. Cerlon also sets fast so there is little or no down time on the area to be repaired. The only down side to Cerlon is the need for training so that Cerlon does not harden before you can finish it.
Any content, trademark’s, or other material that might be found on the Carlos website that is not Carlos’s property remains the copyright of its respective owner/s. In no way does Carlos claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Carlos. All Rights Reserved.