Published at Saturday, August 04th, 2018 - 06:46:54 AM. . By Maritza Emerson.
Exact or recess? You can choose to have your blind made to fit the inside of the recess of your window or it can hang on the inside. Exact This is the measurement you need to take if you want your blind to hang outside the window recess. We will make your blind exactly to these measurements.Two simple steps to an exact measurement: 1. Measure the exact width of where youd like your blind to be. Note down the measurement. 2. Measure the exact drop from the top of where you want your blind to be to the bottom. Note down the measurement.
Plan and Begin laying Your Flooring - Now that you have everything you need, you are ready to begin. The first thing you need to do is remove everything from the room. If you are going over vinyl or linoleum you do not need to remove it, Pergo is only 9mm thick so you can easily go right over it. If you had carpet you will need to remove it and all the carpet tacks. Then sweep the floor and make sure all debris is removed. Make sure that you remove all base boards and door casing, this will allow you to make less cuts.
Any content, trademark’s, or other material that might be found on the Carlos website that is not Carlos’s property remains the copyright of its respective owner/s. In no way does Carlos claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Carlos. All Rights Reserved.